A Monte Carlo simulation of the ELECTRA reactor using (U,Zr)N fuel and a liquid lithium coolant is performed using the Serpent simulation code. The results show a reactor with a total reactivity coefficient of the coolant, fuel and material expansion that is strongly negative. These properties make the ELECTRA reactor a good candidate for a safe space reactor that could be used for propulsion of manned and unmanned space vehicles to Mars and other parts of our solar system..

GE Healthcare operates in Uppsala (Sweden) and develops systems, equipments and medium to purify medical substances. Discussions with the local authority concerning planed far-reaching changes and upgrades of the biological process techniques for sewage management, aroused the question about revising the terms of permit for the activity. Therefore it seemed necessary to evaluate a newly installed biological process technique, which is the background of this thesis. The evaluated biological treatment process was built in 2003 and consists of a Biological reactor filled with moving bed carriers with a high surface area for biological growth. At the time of the project the biological wastewater treatment plant consisted of a flow equalization facility and two following parallel biological processes; a Biological reactor with moving bed carriers and a tower trickling filter.The aim of this thesis was to survey the function of the Biological reactor with respect to the reduction of organic matter.

A new build in the Swedish nuclear power system would entail increased re-quirements for the proposed repository, which is adapted after the reactors of today. With a fast reactor, capable of burning nuclear waste, operating in parallel with the light water reactors, the increased requirements on the repository could be reduced.In this thesis, simulations of a light water reactor and a fast reactor have been performed by using the Monte Carlo code Serpent to investigate the changes in the fuel inventory. The light water reactor in the study is a boiling water reactor and the fast reactor of the type sodium-cooled fast reactor and they have been used for three different operation scenarios.By studying the fuel composition and the results from the simulations of the three scenarios conclusions can be drawn. Conclusions regarding the change of the fuel inventory and decay heat in Clab as well as the interim storage facility and in the repository. Depending on the operation alternative the changes dif-fered significantly and especially regarding the mass of burned actinides for different fuels in the fast reactor.The lowest increase of fuel assemblies was meet when using 50 years old fuel with 20MWd/kg U burnout and 2,0 % enrichment for start up of the fast reactor and 30 years old fuel assemblies with 50MWd/kg U burnout and 4,7 % enrichment for the further operation of the reactor.The increase of the number of fuel assemblies was 3174, which is equivalent to 641tons of heavy metal.

 This report deals with thecollaborative project between FagrellProdukt Utveckling AB and studentsfrom the Faculty of Science andTechnology at Uppsala University. Theoverall objective of the project wasin addition to developing students'abilities, to help Fagrell withverification and development ofFagrells prototype, Fundamental flowreactor, for flow chemistry. Theuniqueness of Fagrells flow reactor isthat it should be simple andaffordable compared to competing flowreactors in the market.The verification was done bylaboratory and simulation sessions.The verification shows that Fagrellsidea on how to construct a flowreactor is very good.The development included bothtechnology and business. The result ofdevelopments can be helpful for thecommercialization of Fagrell flowreactor..

A bioslurry reactor was built for the bioremediation of TNT contaminated waste from the demilitarization industry. The field test was conducted at Vingåkersverken in Vingåker, Sweden, to see if results from laboratory studies could be repeated in a full scale reactor. The goal of the project was to optimize the reactor to such a degree that it could be used to handle the waste produced at Vingåkersverken and also that this technique could be applied for remediation of contaminated soils. Unfortunately the samples taken during the full scale field test were destroyed by the shipping company and no analysis was possible. A later attempt by the Biorex research group has also been unsuccessful to reduce the amount of TNT using the bioreactor.

The scope of this project is to make a comparison of costs associated with wind and nuclear power in order to decide which one of these is the most suitable in the case of an increased demand for electricity. It is also investigated if there are other factors that can influence the choice of energy source.An average cost is calculated in terms of kronor per kilowatt-hour (SEK/kWh) using cost of investment, operation & maintenance and taxes & subsidies. Total investment cost is recalculated to production cost using the annuity method at three different interest rates (6%, 9% and 12%).The comparison is made between three cases of wind power and two cases of nuclear power. For wind power there are two ocean-based (300MW and 100MW installed capacity, respectively) and one land-based (60MW) wind farm. For nuclear power there is one EPR-reactor (1600MW) and one AP1000-reactor (1100MW).

This thesis is   focused on identifying and documenting all   electrical equipment, such as devices, power lines / cables, and connectors in the facility and also on presenting a brief   technical description and information of the systems around the reactors.   Furthermore there will be a brief description of LabVIEW - which is a   graphical programming language- and which devices / elements   are programmed. For further notification, I am not   responsible for the programming of the devices in LabVIEW   which I have only used as a tool in my work. The plant   for production of biogas consists of four reactors   of which the third reactor (Lakbädden)   is connected to another reactor (UASB)   where they cooperate with each other.   The reactors are used for producing   biogas in the form of methane gas.The reactors I and II are   connected to, various electrical devices as, flow meters, temperature   sensors, frequency converter and   more.

The aim of the study was to understand how the family home secretary reasons and thinks and how they express themselves in their actions towards the family home?s biological children. The method used is qualitative semi-structured interviews, involving six family home secretaries from four different municipalities. The results were analyzed with the help of two theories ? the theory of grassroots bureaucracy and the sociology of childhood theory.

This article deals with the woodlands as a biological cultural heritage and how it is taken care of in the protected woodlands in Skåne, in the south of Sweden, especially the deciduous trees which is dominated by beech. High biological values have emerged as a result of grazing and different kinds of forestry. The protected woodlands have been ripped of its cultural influences which changes the biological values on which the original reasons for protection was founded..

The purpose of this essay was to examine, from a gender perspective, how biological children in foster families experience the situation of living with foster siblings. The material consists of ten interviews. We searched answers to the questions:1. In what way have the biological childrens relations to parents, biological siblings and foster siblings changed through the placement?2.

The aim of the study was to understand how the family home secretary reasons and thinks and how they express themselves in their actions towards the family home?s biological children. The method used is qualitative semi-structured interviews, involving six family home secretaries from four different municipalities. The results were analyzed with the help of two theories ? the theory of grassroots bureaucracy and the sociology of childhood theory.

The thesis was performed at Forsmarks Kraftgrupp AB in the department ofmechanical engineering, FTCM. Forsmark nuclear power plant has had problems with cracks in some of the controlrods which are placed in the reactor at Forsmark 3. To investigate the cause of this,material samples were taken from five of the damaged control rods. This sampling ofthe rods resulted too short rods to be transported in the shipping container to theinterim storage facility for used nuclear fuel in Oskarshamn. Control rods are crucial components in a nuclear reactor, regulating the reactoreffect by blocking or unblocking fuel rods. Control rods which have been in thereactor are always handled under water in order to protect against the radiation theyemit. The task was to design a control rod adapter that extends the control rod sotransport can be performed from Forsmark. The goal of the work was a complete setof blueprints so the control rod adapter can be manufactured and mounted on theshort control rods and then be transported to the interim storage facility. The work began with mapping of how control rods normally being handled from thereactor to the interim storage facility.

The purpose of this essay was to look into whether any attention is paid to the biological children in foster families when the investigation about foster home is made. I did some qualitative interviews with six foster home-investigators, working in five different municipalities. Some of the main questions have been: Do the investigator meet the biological children during an investigation? Are the children´s opinions taken into consideration? Is the suitability of a foster home judged even from the biological children´s perspective?It was shown that it could happen that a foster home was not approved, if it for some reasons should be a negative experience for the biological children, if a foster child would be placed in their home. All the six persons in my interviews thought that it is important to take the biological children´s opinions into consideration, and that the family is not suitable to be a foster home if not all of the family members have a positive attitude.

Biological pest management is defined as control of pests using their natural enemies. This method has been used in Sweden since the 1970´s and it has been developed ever since. Biological pest management is today relatively common among commercial growers but there are good possibilities to apply this method in the home gardens as well. The aim with this thesis is to compile a report from both the companies that are marketing the products and the home gardener´s point of view. This should give a better understanding of the market and how it could be improved. We will give examples of products that represent the different kinds of organisms that are being used in biological pest management. Our hope is that this will be an introduction to all interested in biological pest management. The legislations regarding registration of organisms are still a matter of discussion and are causing problems to producers, distributors and the market in general. Why isn´t biological pest management more common in the home garden? The main reason appears to be the lack of knowledge in the subject. What are the benefits using biological pest management when it requires so much knowledge and it´s more expensive than conventional pest management? With the environmental problems we face today, we hope that every single gardener has an interest in developing an environment as clean as possible, even if only in one's own backyard..

The aim of this study was to examine how adoptive parents related to parenting and how they related to their children?s biological origin. Issues that were used were how adoptive parents described their own parenting, how they described their own thoughts about their children eventually wanting to search their biological origin and how adoptive parents described the child´s country of birth attitudes towards adoptees wishes to search their biological origin. The method used was qualitative research interviews. The theory that was used for analyzing the collected data was attachment theory.